What's new in MaterialEX
Version 2.3.5
New in 2.3.5
- The Smart brush paints the whole material. The stroke reveals the material with its grain, wear and grime, like a paint mask: up to 2.3.4 it left a single-colour patch, the base layer's. The first stroke applies the material, and one Ctrl+Z takes both away.
- Nuts, rivets and screws in a row. The Stroke tool in stamp mode lays any tip from the catalogue —the built-in hard-surface ones or one of yours— along the path, one at each point and with its relief. Picking a hard-surface tip turns height on, so the screw shows its cross.
- Every tool has its own right-click menu, in rows like the brush's, and the tools that stamp a tip show the tip catalogue as thumbnails, yours included.
- The pattern gets fine on a large model: the "Pattern" control goes up to ×16 and the generator's scale up to 2048 cells.
- The window uses the app's bar as its title bar: the logo next to "File", and minimise, maximise and close on the right. Dragging an empty part of the bar moves the window, and a double click maximises it.
Version 2.3.4
New in 2.3.4
- A model without UVs opens and can be painted. The app unwraps it on opening and the project saves the unwrap: touching up the model later doesn't shift the painting. It reaches the
.blendand the GLB too. - The pen feels pressure. With a Windows Ink tablet, pressing lightly shrinks the stamp or lowers its opacity, with its curve and minimums in Preferences › Pen. The pen buttons open the brush quick menu, orbit or switch to the eraser while held.
- The material finish: clear coat, sheen and anisotropy, in the viewer and in all four exports. And they are painted BY ZONE: a layer with "Finish" leaves its weights where it paints, like the walnut that loses its varnish where it wore away.
- Eighteen ready-made brushes, in the dock's "Brushes" tab: airbrush, pen, chalk, sponge, splatter, rivets, stitches, weld… They change the shape of the stroke, not the colour or the material, and the current brush can be saved as one of yours.
- The 36 stencil letters, A to Z and 0 to 9, with their bridges.
- More catalogue: eleven new materials —woods, stones, fabrics and leathers— and CHAINMAIL, with real holes in the alpha, twenty-three procedurals, triplanar, planar, cylindrical and spherical projections for the PBR layer, thirteen hard-surface and grunge tips, and new mask generators: chipped breakup, scratches and stains measured on the model, and steps.
- New layer filters: gradient map, replace colour, high pass, outline, invert height and bevel. And new blend modes: subtract, divide, exclusion, colour burn, colour dodge and soft, hard and linear light.
- The history is visible: the "Edit" menu names each step, and one click goes back to any of them.
- An occlusion, curvature or thickness map baked in another program is imported from the oven and touched up like the baked ones.
- Godot 4 joins the engines, and every export also leaves a MaterialX (OpenPBR) file with the same maps. The viewer adds grain and depth of field.
- Recipes and MCP:
materialex --receta work.jsonopens a model, bakes it, applies materials, PBR sets from your library and fill layers with their blend mode, exports and saves without touching the interface, andmaterialex --mcpoffers it to an assistant such as Claude or Cursor. Thematerialexcommand is installed with the app. - Without Vulkan the app says so in a window that names what is missing, instead of closing on start.
What 2.3.4 fixes
- The catalogue's scratches are measured on the model and are not cut at the UV seams.
- "Find" takes the layer's colour before its filters.
- The export removes its staging folder before saying it finished.
- What the audit of all of the above found, fifteen rounds, mostly in the generated UVs.
Version 2.3.3
New in 2.3.3
- Specular-glossiness materials come in with their colour. An older glTF that stored its materials that way —with the
KHR_materials_pbrSpecularGlossinessextension— opened white and without textures, and if it required the extension, it didn't open. Now they come in with their diffuse colour and texture and the roughness their glossiness gives, the way viewers show them, and the opening notice says the specular map isn't read. - A GLB without the bounds of its positions opens, as in three.js and Blender: several exporters don't write them. And what really isn't valid in a glTF is reported in the app's language and with where it is in the file, instead of the reader's raw error.
- Two different materials with the same name are reported. They come in as one —a material goes by its name— and the opening notice says how to split them: "Move to material…".
What 2.3.3 fixes
- "Pick" in Color ID takes from the right piece. Looking at a piece of another material, it took a believable, wrong colour; now it only takes from pieces of the material you're painting, and forgets what you looked at when you open another model.
- Fix no longer flattens what was painted at low opacity. A layer painted by hand with different roughness values, below half opacity, was fixed with the average and no warning; now it says it can't be fixed, as at full opacity. And the leftover of a soft eraser no longer enlarges the decal frame or stops fixing on a UDIM model.
- Choosing another sculpt while the normal bakes is no longer lost. It was ignored without a word, and "High-poly" named the new one with the previous one's normal already in place. Now "High-poly" is disabled while baking and says why.
- Exporting just the GLB or just the
.blenddoesn't need space on drive C:. The intermediate maps went to the Windows temp folder, and a large export to another drive failed with C: full. Now they go inside the export folder and are deleted at the end. - A piece hidden in Blender after painting doesn't shift the painting. A project on a
.blendopened with the painting out of place if, after saving, you hid a piece that shared its material; now it opens as it was painted. - The dock shows whole. The "Load decal…" tile was cut off with the tab empty, and the first row of Masks was cut off at the default height.
Version 2.3.2
New in 2.3.2
- Baked maps can be retouched with the brush. With the view on Baked, the brush paints on the map being shown —occlusion, curvature, thickness or height— and the eraser goes back to what was baked. The masks that read that map —edge wear, dirt in the hollows— follow the retouch. It looks the same in the viewport and in the 2D view, survives baking again and changing the resolution, and travels in the project.
- The bake says how far along it is, in a small window over the viewport that stays out of the way: you keep painting while it bakes.
- Eight new brush tips: grunge, scratches, clouds, sponge, blotches, cracks, dots and fibres.
- PBR grates open their holes. A set with opacity —its own map, or the alpha of its colour— opens holes in the model, cuts the layer so the one below shows through, or is switched off with «No holes». Also when projected.
- The Stroke lays a row of decals along the path, with its size, spacing, rotation and random variations, as in Substance.
- The default studio lights like a lookdev, and the environment's «Intensity» lights the model and not just the background: a PBR shows its colour without blowing the exposure.
- A
.mmatis applied when dropped on the window or opened from Windows. - From a
.blendcomes what Blender shows. What is hidden —the high-poly kept over the low-poly for baking— stays out, and the status line says which objects. A project painted back when everything came in opens as it was painted. - Chinese, Japanese and Korean names show: those of a model's pieces and materials, the layers, the recent files and the Text tool's font list, which names each font in English. And the Text tool warns about the letters the chosen font doesn't have.
- Large images: a decal, tip or stencil over 8192 px comes in reduced, an image of up to 16,384 px is read, and a 16K HDRI opens.
- ambientCG, Megascans and Poliigon PBRs come in with their metallic, gloss and ARM.
- With Windows in English, the
.mtexand.mmatfile types are named in English.
What 2.3.2 fixes
Two audits of the whole app, with a critical reviewer round after round, closed more than three hundred defects. The most noticeable:
- Lost work. Applying a saved material with a group hung the app; opening a mesh that didn't load left the project half-replaced, and the next Ctrl+S saved it broken; recovering an autosave could overwrite the project with an empty one; renaming a material or merging groups lost work.
- Export no longer overwrites what isn't its own: the source
.blendor GLB, someone else's file with the same name, the open model's textures, or those of an earlier export in the same folder, which the GLB or the.blendalone took away. - What you see is what comes out. Decals and texts without the dark halo on their edge; thin lines —a scratch, the curvature of an edge, the letter of a logo— no longer vanish when scaled down; the 2D view shows the same colour as the model; baked maps and normals without a line at every seam; the normal reaches Unreal in DirectX and glass reaches Unity URP with its alpha; the GLB shows with mips and double-sided; a baked leaf or cloth lets light through; and zoomed in orthographic, projection still paints and the
.blendcamera doesn't cut the model. - Memory. What doesn't fit under the VRAM ceiling waits instead of closing the app, and a huge image is reduced when read.
- Fixing a layer keeps its material, its tile, its mask, what was painted by hand on top and the edge of what was painted.
- Reloading the model keeps what is hidden, the name and the material of each repeated piece —the wheels of an Alt+D—, even with one missing.
- What is in use is read again: a decal, tip or stencil edited outside shows as it was left, and a stencil switched off stays off.
- With the app in English, export messages and the names of new layers come out in English.
Version 2.3.0
New in 2.3.0
- Skin, in a new family: «Organic». A smart material for human skin: over a light medium tone, the flush of thin parts —ears, nose— from the baked thickness, redder and darker creases, fine pores in the roughness and the height, and the oily sheen of what sticks out. Tint takes it to any darker tone.
- Light passes through thin parts. Any layer can be «Translucent», next to «Emissive», with its Strength and the colour of the light that passes through: with the light behind, ears and nose glow red, like skin against the light, and the shadow comes in softer. How thin each point is comes from the baked maps. Skin comes translucent.
- Translucency leaves the program. To Blender, as the Principled's subsurface scattering, which Cycles and EEVEE compute for real; in the GLB, as diffuse transmission (
KHR_materials_diffuse_transmission) when the model is baked; and for engines, aTranslucencymap and —baked— aThicknessmap for their subsurface profile. - The
.blendlooks like the viewport and is named after the project. It carries the tone curve and exposure, the sky with its rotation, the key light as a sun and the camera, and opens in «Material Preview» looking through that camera. In your own.blend, what you built stays: the sky, the light and the camera come in only if you didn't put in your own.
What 2.3.0 fixes
- The relief in the
.blendis the one in the viewport, and it goes in once. The exported normal came out softer than what was painted —and different at each resolution—, and the height also went into the material's «Displacement», which in Blender adds the relief again. The same goes for the GLB and the engines. - The viewport's ACES curve is the real one, Blender's «ACES 1.3»: mid grey and saturated reds came out lighter. A project saved with the old one opens with one more stop of exposure and looks as it was painted.
- With the app in English, meshes without a material form the «No material» set, not one named in Spanish.
Version 2.2.0
New in 2.2.0
- «Export» in the top bar. A button with the two outputs you ask for almost every time: «Export GLB…» leaves a
.glbwith the textures inside in the folder, and «Export .blend…», a.blendwith the images packed. «More options…» opens «Export» in the panel, where the usual export checkboxes are still there; the quick outputs don't touch them. If Blender is missing, the.blendfirst asks where it is. - The axis gizmo, like Blender's. Next to the light disc, the three world axes with Blender's colours and names —Z up—. Click an axis to look from there; click the same one again for the opposite side; drag it to orbit. As in Blender, aligning to an axis switches to orthographic and orbiting goes back to perspective; if you chose orthographic in «Camera», it stays.
- A click on the empty canvas lets go of the selection, like Esc: the selected piece, the frame of a decal you just placed —the layer stays, and the frame comes back when you touch it— and the Stroke path, which stays as a layer.
- With a colour field's eyedropper on, its icon follows the pointer, so you know the next click on the model takes a colour. Esc cancels it.
What 2.2.0 fixes
- The eyedropper takes the colour of any piece, also one of another material: with the dragon's eye selected, the tongue gave a colour that wasn't its own.
- The eye of a layer row no longer sits on top of its drag handle.
- «Template…» and «Export for engine…» are no longer stuck together in «Export».
Version 2.1.2
New in 2.1.2
- The colour field is a bar with its code. Colour pickers were a circle that looked like a slider handle; now they're a bar that shows its
#RRGGBB. You can type the code, and the picker has an eyedropper: the next click on the model takes its colour, without painting. Esc cancels it. - Ctrl + mouse wheel changes the size of the tool. Over the viewport, it changes the size its bar shows: the brush radius, the width of the next decal or the size of the text. The camera doesn't move.
- The app asks where Blender is if it can't find it, only once, and the chosen path is remembered. It also asks when you open a
.blendwithout Blender, or when you click the notice on the bottom bar. - Right-click a decal, a tip, a stencil or a sky to show it in its folder or remove it from the library, as you already could with a PBR set. Removing asks first and moves it to the Recycle Bin, where it can be restored. What you already placed or painted with it stays.
What 2.1.2 fixes
- The store version opens
.blendfiles again. On a PC where the app had already created its data folder, Blender couldn't find what the app prepared for the conversion, and opening failed. - The Blender path you typed in «Export» wasn't saved: it was lost when the app closed. Now it stays. And if you pick the
blender-launcher.exefrom the Start menu, theblender.exenext to it is used, because with the launcher the conversion failed without saying why. - Picking a layer of a material no longer shifts the right panel. With «Rust in the bare patch» from «Chipped paint», the panel widened and pushed everything below it.
- A decal's long name no longer spills out of its tile. It ran from edge to edge, went under the green dot and was cut at the end; now it keeps some air on the sides and, if it doesn't fit, it's cut in the middle, so you see how it starts and how it ends.
- Loading a decal, a tip or a stencil gives its name, not its catalog's; and a tip or a stencil in WebP now shows up in the library.
- A text's colour changes live, even with another tool in hand: its section in the right panel has it. And the colour picker no longer closes with every click inside it.
- With the app in English, the filters header and the Wave tooltip are in English.
Version 2.1.1
New in 2.1.1
- The intensity of what a PBR set brings. The layer of a PBR set has a row for each channel the set brings — colour, roughness and metallic — that multiplies it from ×0 to ×2, with ×1 as it comes; height keeps its Bump. A project that uses it opens in this version and later.
What 2.1.1 fixes
- A material's controls no longer undo what you changed by hand. Moving Wear, Pattern or any other control of an applied material reset the colour — or whatever it was — you had changed on one of its layers. Now what you changed stays, and the rest follows the control. And the layers that grow from the one below, like the crust and the run-off of splashed mud, no longer come loose from it when a control moves.
- A real HDRI no longer makes materials look wet. With a sky like a sunset everything looked wet, and a roughness at its maximum still showed sparkles of the sun, with and without ray tracing. Now a rough surface reflects the sky evenly, as it should.
- The channels a PBR set doesn't bring no longer look like black buttons. They show a dashed outline, a click doesn't change them, and on hover they say the set doesn't have that map. A missing roughness or metallic is painted on a layer above.
- Unselected chips stand apart. They all wrote in white; now the selected one is white and the rest are grey.
Version 2.1.0
New in 2.1.0
- Apply a material only to the selected pieces. Select one or more pieces in Pieces and click a material in the dock — a built-in one, one from "In this file" or a PBR set —: it goes only onto those pieces, with a mask, and the rest of the material stays as it was. The material's button says "To the piece" or "To the pieces" before you click, Ctrl+Z removes it, and if the pieces belong to several materials, each one gets its own. With no pieces selected, "Apply" covers the whole material, as always.
What 2.1.0 fixes
- Long material names no longer push the panel out of the window. On a model with very long material names — Tripo's are "tripo_mat_" plus a code —, as soon as there were two materials the "Set" dropdown showed them in full and the right panel slid out of the window. Now the name is shortened in the middle and reads in full on hover, also in its list and in "Merge with…".
Version 2.0.1
What 2.0.1 fixes
- The exported
.blendcarries all your materials. On a model with several materials on one object — a sword with the blade, the edge and the maker's mark on a single mesh — the.blendkept the textures but left the pieces with their old materials, and some got another piece's. Now each material stays on the faces you painted, with its UV, and if a piece is no longer in the file, the export says so instead of ending in "OK". - Unpacking the
.blend's images no longer overwrites them. Each texture has its own file intextures/, next to the.blend, with its material's name in front: they were all calledbase_color.pngand only one was left. - The export folder stays clean. With "Deliver only the .blend", a folder with a
__pycache__inside was left behind. - The English interface no longer mixes in Spanish. The controls of the stroke dynamics menu (Stabilize, Radial and its copies, Scatter, Size jitter and Flow jitter), those of the physical brush, the Bloom Threshold and their tooltips came out in Spanish. And after switching languages, the status bar stayed in the previous one: now it names the new language.